VVDI2 Commander Includes all the VVDI2 VAG functions, the function of Tango, remote control generation and chip identification is improved, and also the coil’s stability has been enhanced.This version contains Basic +VVAG 4th+VAG 5th+OBD copy48+96bit 48+MQB
Xhorse VVDI2 Vag Version ( Basic +VW+ 5th IMMO+Porsche)
Compared with VVDI 2 full version, the Only Difference is No BMW OBD+BMW CAS4+BMW FEM/BDC ,You can buy BMW authorizations later by offering us the serial number
Xhorse this VVDI2 version authorization option:
0=(VK-01) key programmer
1=(VJ-01) Passthru J2534
2=(VV-01) VW 4th
3=(VV-02) VW 5th
Top 5 Reasons to Get VVDI2 VAG Full:
7=(VP-01) Poreche immo data
11=(VV-04)Copy 48 Transponder (96 bit)
12=(VV-05)VAG MQB immobilizer
1.Lifelong Free Update:Update online frequently for both software and firmware
2.Newly Add Porsche,PSA Software Function for Free.
3.Support Diagstic function like:Identification,Read/Clear DTC'S,Coding,Actuator test,Security access,ecu flasher,UDS adaption.etc
4.Special Function:Change KM,EEPROM Dump Tool,Engine control Unit,K-Line Instrument/Immobox,adapt Unit,Component Protection.
5.Always good feevback from customers
Difference Among All the VVDI2 Key Programmer:
Plug-in function, reserved connectors
Contact information:Email: Sales@XhorseShop.co.uk Skype:
VVDI 2 can act as a multifunction programmer to connect plug-ins, and read & write IC and CPU data.
Can read and write Benz IR key, can program key for old and new Mercedes–Benz, can connect BMW plug to realize OBD function, and meanwhile reserve some connectors for further uses.
The core function is to detect the remote control frequency
Automatically identify chip type
Support multi-function on VW vehicles
Remote control programmer
J2534 compatible adapter
1. Detect key frequency, automatically identify chip type
The test result can show on the main unit display, no need to connect computer
2. Support VAG vehicle diagnostic function
Read & write Immo4/Immo5 system
Program BCM remote
K-Line instrument immobilizer box
Program control unit
Unlock Immo1/Immo2 firmware protection
Support data manipulation tools
3. Key programmer
Program key chip
Generate specialized chips
Immobilizer data processing tool
Other key tools
Generate remote control
4. Passthru J2534 Introduction
With built-in switch matrix, it supports third-party diagnostic software including: ODIS, Toyota TIS techstream etc.
To perform VVDI2 diagnostic function, third-party diagnostic software should be compatible with J2534 function.
VVDI 2 superiority:
VVDI technician has devoted themselves to VVDI free update online and update service in the pass five years. This is what VVDI has been widely respected and ranked as a power tool.
There is no doubt that the more power and high-end configuration VVD2 will inherit the fine traditions.
Apart from free update online service and system optimization, more powerful functions and vehicle models (Like Porsche) will soon be available via update. And other more functions, you name it…
VVDI2 goes beyond than VVDI in function, connectors and vehicle coverage etc. After all, VVDI belongs to locksmith tool while VVDI2 becomes a comprehensive locksmith device.
VVDI2 VAG Feedback:
VVDI2 Package List:
I successfully added a key bcm2 on a 2013 audi a5.
2007 Audi A4 B7 RB8 crypto - mileage correction ok
Audi BCM2 add spare key by obd worked fine, and I did one on a 2013 A5 and it worked flawlessly.
A6/Q7 EZS Kessy: Added a dealer key (remote sourced from the dealer) without issues. Seemed to read everything properly but I had a working key to begin with.
Audi A6: Testet with A6 read kessy working, learned new key
Skoda Octavia 2006: got CS & PIN , programmed key fine, but not remote programming.
VW passat. B5: Pulled PIN, programmed key, corrected miles.
VW Passat B6 2009: Pulled PIN but couldn't get 6 bytes CS, needed comfort dump.
VW Transporter T5 2006 : Pulled PIN Programmed key, no remote programming.
Audi A4 2006 : mileage correction success .
Audi A6 2003: Mileage correction fail. car not start. remove battery terminal. car start.
Had no problem with precoding and programmin 2 keys for 2014 Jetta today. Worked well.
Audi A6 C6 2007 add valet key via OBD without problem.
1.VVDI 2 Main Interface
2.5th BDM Programmer
4.Remote Programmer (no need to buy SK184, included)
+86 15387077565Scan the QR code, feel free to contact us on your smart phone.
Shipping Method & Delivery1. UK/Czech Warehouse Shipping:
2-5 working days with No Tax. We have stock in our UK/Czech
warehouse for most items.
All Items titled "UK Ship" are ship from our UK warehouse,titled "EU Ship" are ship from our Czech warehouse, titled "UK/EU Ship" both of them have in stock(we will use these warehouse as first option) Because of the UK Brexit from European Union.To UK Address, Package Can Only Be Sent from UK Warehouse.To Other European Countries, Package Can Only Be Sent from Our Czech Warehouse.2. China warehouse Ship:1) Yodel Virtual warehouse Shipping:
6-8 days with No Tax
for UK customers.2) Yanwen Express: 8-10 working days: No Tax
for European Countries.The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
(Due to high custom tax in European Countries,Like Germany, Greece,Romania,Sweden,France,etc, we will use Yanwen express as first option, if you need faster DHL shipment,
please contact us ,thank you)3) DHL Shipping:
5-8 working days. We will declare a lower price on the invoice to help your clearance. 4) Singpost/HongKong Airmail:
15- 20 working days. For the Price below £100, we will ship it to you buy Airmail.
If you have not received the goods during the normal time, please contact us for checking the package status timely online or by email: Sales@XhorseShop.co.uk
Xhorse VVDI2 Commander with Basic VW Module Technical Service
Original Xhorse VVDI2 Technical Service
Q: I do have BMW X5 from 2013+ , it's F15 with CAS4+ I guess and 5M48H, it has all keys lost. What equipment I should buy from you to make a new key?
A: 1) For 5M48H, you need to use XPROG or VVDI pro to read the date
2) Use BMW MULTI TOOL or VVDI 2 do CAS4+, and use the data you read out to generate the key data to match programming and simultaneous car
For second steps. If you choose BMW MULTI TOOL, you still need to buy the CAS4 adapter. If you choose VVDI2, then no need to buy others.
Q: I want to open component security function. what should i do?
A: For this function. If you want to use, you need to open pin,mac reading,CS authorization then can use. If you have bought the condor key cutting machine. Then this authorization is free to open. Please give us your name/country/EmailVVDI SN/ VVDI2 SN / CONDOR SN. If you do not bought CONDOR key cutting machine, then cannot open this authorization.
Q: Hello. I purchased this product and it says at the top... re synchronization in 23 days.. How do you re synchronization the device...Thank you.
A: This is normal. Once the day become 1, you just need to connect interent. Then it will be back to 30 days again. This is setted by Xhorse company to avoid others crack their software.